30-day free trial on every app · one-time code · no subscription
DIALFORGE

Outdoor and photography

Multi-Pitch Climb

A multi-pitch climbing app for your watch: one phase per button press for approach, climb, belay and descent, with altitude gain per pitch in a single activity.

€6.9930-day free trial

Download on Garmin Connect IQ Buy unlock code

  1. Install the app from the Connect IQ store. It works fully and for free for the first 30 days.
  2. Enter the watch ID and pay. The code appears here at once and in the e-mail you give when paying.
  3. Enter the code in the app settings, field "Unlock code". The watch checks it offline.
Multi-Pitch Climb icon

30-day free trial

The app works fully and for free for the first 30 days after you first open it. After that you can buy a one-time unlock code below. No subscription.

Route log for multi-pitch climbing. Garmin's climbing activity profile logs laps poorly on a long trad or alpine route, and there is no dedicated app for it. This one gives you a phase for every stance instead of one noisy auto-lap, in a single Garmin activity for the whole route.

  • Approach, then Climb/Belay per pitch (alternating), Descent, optional Break: one phase per button press. Belay is the time you belay your partner between your own climbs
  • Leader marked per pitch (L/F), switching automatically at every new pitch (setting "Alternate leads", on by default); swap it by hand anytime if you mixed it up
  • Altitude gain per pitch from the barometer, filtered so weather noise is not counted as climbing
  • Route totals: pitches, vertical gain, time climbing vs belaying, time on route, altitude, heart rate, clock, sunset
  • One FIT lap per phase with phase, pitch and gain fields for Garmin Connect
  • GPS stays on for approach and descent; while you climb and belay the app stops asking for GPS positions
  • Optional vibration reminder after N minutes of belay (off by default)

Controls: START = next phase. Hold or MENU opens the menu: switch to descent, add break, undo last change, swap leader, save or discard. UP/DOWN (or swipe) switches to the second screen with the pitch table and route totals. A touch never changes the phase on watches that have a START button (use START). On watches with no START button, tap twice within 2 seconds for the next phase, hold for the menu.

Altitude comes from the watch barometer, so it can drift a little with changing weather - treat the gain numbers as a good estimate, not a surveyor's measurement.

Free trial: the app works fully and for free for the first 30 days. After that you can buy a one-time code at dialforge.dev. Changing your watch? Write to me and I will move your code for free. No subscription. I am a student and I build these apps myself after hours. I do not own every watch model, so bugs can happen on some. If something does not work or is missing, write through the form at dialforge.dev. I fix every reported bug within 72 hours and send the update to Garmin (Garmin approval usually takes 1-3 days). If you reported a bug, check whether the fix is already there, and if the bug lowered your rating, I would be grateful if you reconsidered it. If the app is useful to you, leave a rating in the store. You can also buy me a coffee or buy the full version, it lets me build more. Purchase: at checkout you confirm immediate delivery of the code, so under EU law the right of withdrawal does not apply. If the app does not work on your watch as described, write to me and I will fix it.

How to use it

Open Multi-Pitch Climb from the watch's app menu.

Works on fenix 8, Forerunner 970, Forerunner 570, Venu 4, Forerunner 965, Forerunner 265, Venu 3, vivoactive 6 and more.

Manual

Multi-Pitch Climb: user manual

What it does

Multi-Pitch Climb is a route log for long climbs. You press a button at every change of phase: Approach, Climb, Belay, Descent, Break. The route is one Garmin Rock Climbing activity with a lap per phase and the gain per pitch.

Requirements and supported watches

Needs Connect IQ 3.3.0+ and the Connect IQ or Garmin Connect phone app. Supported watches:

  • Round AMOLED: epix 2 and epix Pro 2, fēnix 8, E, Forerunner 165, 265, 570, 965, 970, Instinct 3 AMOLED, Crossover AMOLED, Venu 2, 3, 4, vivoactive 5, 6.
  • Round MIP: enduro 3, fēnix 7 series, 8 Solar, Forerunner 55, 245, 255, vivoactive 4.
  • Square and rectangular AMOLED: Venu Sq 2, Venu X1.

Installation

In the Connect IQ app on your phone (or Garmin Connect, then the Connect IQ Store) find "Multi-Pitch Climb" by Dialforge, tap Install and sync the watch. Open it from the apps list: press START on the watch face, then pick Multi-Pitch Climb.

First launch

No start screen: the app opens on the route, in APPROACH, and recording starts. The first START begins CLIMB 1. The 30-day free trial starts the first time you open it.

Controls

Watches with buttons (START, UP, DOWN, BACK)

  • START moves to the next phase: Approach, Climb 1, Belay 1, Climb 2 and so on, with a vibration.
  • Leader: L means you lead the pitch, F that your partner does. It flips after each climb unless Alternate leads is off.
  • Holding the menu button or BACK opens the menu and pauses recording: Resume, Switch to descent, Add break, Undo last change, Swap leader, Save and finish, Discard (asks twice).
  • After a break START returns to the interrupted phase. In DESCENT each START begins another descent.
  • UP or DOWN switches to the Route screen: recent pitches (number, L or F, time, gain) and totals: pitches, gain, climbing and belay time, time on route, altitude, heart rate, clock, sunset.

Touch watches (tap, hold, swipe)

  • Watches with a START button ignore taps, so a sleeve cannot add a pitch. Hold opens the menu, swipe up or down switches screens.
  • Touch-only watches: tap twice within 2 seconds for the next phase (the first tap says Tap again), hold for the menu.

Settings

Phone: Connect IQ app, Multi-Pitch Climb, Settings (the unlock code fields are there too).

  • Alternate leads (swap leader each pitch): on or off. Default: on.
  • Belay reminder: Off, 5 min, 10 min, 15 min, 20 min. Default: Off.

License

  • Free trial: 30 days from the first launch, everything works.
  • Price: 6.99 EUR once at dialforge.dev, no subscription. The 8-character code is tied to your watch's UID.
  • Where to enter it: phone, Connect IQ app, Multi-Pitch Climb, Settings. Read the UID in "Watch UID (needed to buy a code)", buy the code, then type it into "Unlock code from dialforge.dev". The trial-ended screen on the watch shows the UID too.
  • After the free trial without a code: a trial-ended screen with the UID replaces the app. Enter the code, then open it again. New watch? Write to us and the code moves for free.

Privacy and permissions

Permissions:

  • Activity recording: saves the session to Garmin Connect.
  • Extra FIT fields: adds the app's values to the saved activity.
  • Positioning: GPS on approach and descent, and the position for sunset.
  • Sensors: barometer for altitude gain, and heart rate.

No internet use. Data stays on the watch and in the activities you save.

Troubleshooting

The code does not work. Check that the UID you bought for matches "Watch UID (needed to buy a code)" and type all 8 characters (case is ignored, no 0, O, 1 or I). A code for another app does not fit. Sync, then reopen.

How is the gain measured? From the watch barometer, ignoring changes under 2 m. Weather can drift it, so treat it as a good estimate.

Does it use GPS? Only on Approach and Descent. During Climb, Belay and Break the app turns it off.

Why is sunset "--"? It needs a known position, so it shows after a GPS fix. The calculation is offline.

Contact

kontakt@dialforge.dev or dialforge.dev. Please write before leaving a low rating.

Permissions and privacy

This product asks the watch for the permissions below. Connect IQ shows them when you install it.

  • Activity recording: Saves your workout in Garmin Connect (the activity from this app). The data stays in your Garmin account.
  • Own data fields in the activity: Adds this app's own numbers (for example points or sets) to the saved activity.
  • Location (GPS): Uses the watch location for distance, speed or sun and moon times. The location is not sent anywhere.
  • Heart rate and sensors: Reads heart rate and other sensors of the watch while the app runs.

This product does not use the internet and sends no data to our servers.

Compatible watches

51mm, Adventurer, Captain, Carbon Edition, Commander - Carbon Edition, D2 Air X15, D2 Mach 1 Pro, Enduro 2, Enduro 3, epix (Gen 2), epix Pro (Gen 2) 42mm, epix Pro (Gen 2) 47mm, epix Pro (Gen 2) 51mm, Forerunner 165, Forerunner 165 Music, Forerunner 245, Forerunner 245 Music, Forerunner 255, Forerunner 255 Music, Forerunner 255s, Forerunner 255s Music, Forerunner 265, Forerunner 265s, Forerunner 55, Forerunner 570 42mm, Forerunner 570 47mm, Forerunner 965, Forerunner 970, fēnix 7, fēnix 7 Pro, fēnix 7 Pro - Solar Edition (no Wi-Fi), fēnix 7S, fēnix 7S Pro, fēnix 7X, fēnix 7X Pro, fēnix 7X Pro - Solar Edition (no Wi-Fi), fēnix 8 43mm, fēnix 8 47mm, fēnix 8 Pro 47mm, fēnix 8 Solar 47mm, fēnix 8 Solar 51mm, fēnix E, Golfer, Instinct 3 AMOLED 45mm, Instinct 3 AMOLED 50mm, Instinct Crossover AMOLED, MARQ (Gen 2) Athlete, MARQ (Gen 2) Aviator, MARQ Adventurer, MARQ Athlete, MARQ Aviator, MARQ Captain, MARQ Captain: American Magic Edition, MARQ Commander, MARQ Driver, MARQ Expedition, MARQ Golfer, MicroLED, quatix 7, quatix 7 Pro, quatix 7 Sapphire, quatix 7X Solar, quatix 8 47mm, quatix 8 Pro 47mm, tactix 7, tactix 7 – AMOLED Edition, tactix 8 47mm, tactix 8 Solar 51mm, Venu 2, Venu 2 Plus, Venu 2S, Venu 3, Venu 3S, Venu 4 41mm, Venu 4 45mm, Venu Sq 2, Venu Sq 2 Music, Venu X1, vívoactive 4, vívoactive 4S, vívoactive 5, vívoactive 6

Rate it

Screenshots

Video

FAQ

What happens after the 30-day free trial?

The app shows a screen asking for a one-time unlock code from dialforge.dev instead of opening normally. Buy the code once below, no subscription.

Does the app send my data to Dialforge?

No. The app works fully offline, and the unlock code is checked on the watch itself, without contacting any server.

The app does not work as described on my watch. What can I do?

Write through the feedback form below, or to the e-mail in the footer, and we will fix it.

Changing your watch?

Write to me and I will move your code for free.

Changelog

Unlock

€6.99

One-time payment. No subscription. The code works on the watch whose ID you enter.

  1. Install the app from the Connect IQ store. It works fully and for free for the first 30 days.
  2. Enter the watch ID and pay. The code appears here at once and in the e-mail you give when paying.

Tell us how to make it better

Sign in as a tester to leave feedback.

Sign in or download for free