30-day free trial on every app · one-time code · no subscription
DIALFORGE

Strength, HIIT and hybrid racing

Hybrid Race Tracker

Race tracker for hybrid fitness races: 8 x 1 km run plus 8 stations. Everything is set on the watch, no phone needed. Transitions are marked by button only, never by GPS, so transition time and order stay correct, even indoors. GPS stays off unless you switch on Run pace (GPS) in the start menu, and then it is used for the pace on run segments only.

€6.9930-day free trial

Download on Garmin Connect IQ Buy unlock code

  1. Install the app from the Connect IQ store. It works fully and for free for the first 30 days.
  2. Enter the watch ID and pay. The code appears here at once and in the e-mail you give when paying.
  3. Enter the code in the app settings, field "Unlock code". The watch checks it offline.
Hybrid Race Tracker icon

30-day free trial

The app works fully and for free for the first 30 days after you first open it. After that you can buy a one-time unlock code below. No subscription.

  • Race plan from a goal time: pick a goal (for example 1:25), the watch splits it across every run, station and transition and shows live how far ahead or behind you are. The split profile is an estimate, the goal time is yours
  • Progress ring around the screen for the current segment: blue, orange from 90 percent of its budget, red when over
  • Categories with station weights from the 2025/26 rulebook (Open and Pro, women and men): sled push and pull, farmers carry, sandbag lunges and wall ball loads shown on screen
  • Full race, 75, 50 or 25 percent, or Custom: switch stations on and off and set the run distance
  • Transitions on or off, optional warm-up lap, pause that stops the clock and the recording
  • Segment clock, total time, next segment, heart rate with zone bar, live difference to your best split
  • Undo the last transition, resume after a crash or restart (within 4 hours)
  • Summary with run, station and transition totals, average run, best-split marks and the difference to your plan. History of the last 10 races on the watch
  • One activity with one FIT lap per segment

How to use it

Open Hybrid Race Tracker from the watch's app menu.

Controls: BACK/LAP = next segment (the button you already click on every lap). UP undoes the last transition. START opens the menu (back to race, pause clock, undo, finish now, save, discard). On touch-only watches: tap = next segment, hold = menu. Opening the menu does not pause timing, use Pause clock for that.

Manual

Hybrid Race Tracker: user manual

What it does

Hybrid Race Tracker times a hybrid fitness race: 8 runs and 8 stations, 31 segments in the order Run, Transition, Station. You move on with a button, never by GPS. One Garmin activity is saved, a lap per segment.

Requirements and supported watches

Needs Connect IQ 3.3.0+ and the Connect IQ or Garmin Connect phone app. Supported watches:

  • Round AMOLED: epix 2 and epix Pro 2, fēnix 8, E, Forerunner 165, 265, 570, 965, 970, Instinct 3 AMOLED, Crossover AMOLED, Venu 2, 3, 4, vivoactive 5, 6.
  • Round MIP: enduro 3, fēnix 7 series, 8 Solar, Forerunner 55, 245, 255, vivoactive 4.
  • Square and rectangular AMOLED: Venu Sq 2, Venu X1.

Installation

In the Connect IQ app on your phone (or Garmin Connect, then the Connect IQ Store) find "Hybrid Race Tracker" by Dialforge, tap Install and sync the watch. Open it from the apps list: press START on the watch face, then pick Hybrid Race Tracker.

First launch

The start screen shows the app name, "Press START" and the free trial days left. START (or a tap) opens the menu: Start race, Mode, Run pace (GPS). The 30-day free trial starts the first time you open it.

Controls

Watches with buttons (START, UP, DOWN, BACK)

  • Start menu: START on Mode cycles Race, Training 25%, 50%, 75%, 100%. START on Run pace (GPS) switches it On or Off.
  • Race: BACK (the LAP button) goes to the next segment. UP undoes the last transition. DOWN does nothing.
  • START opens the race menu: Back to race, Undo last transition, Finish now, Save and finish, Discard (asks twice). The clock keeps running.

Touch watches (tap, hold, swipe)

  • Watches with UP and DOWN buttons: taps do nothing, so a wet sleeve cannot close a segment.
  • Touch-only watches: tap is the next segment, hold opens the race menu with Undo last transition. Swipes do nothing.

Settings

Phone: Connect IQ app, Hybrid Race Tracker, Settings (the unlock code fields are there too).

On the watch, inside the app:

  • Mode: Race, or Training at 25%, 50%, 75% or 100% of the distances.
  • Run pace (GPS): Off by default. On shows pace on runs. Best times are kept per mode and scale.
  • Targets scale with the mode: runs 1000 m, stations 50 to 1000 m, WALL BALLS 100 reps.

License

  • Free trial: 30 days from the first launch, everything works.
  • Price: 6.99 EUR once at dialforge.dev, no subscription. The 8-character code is tied to your watch's UID.
  • Where to enter it: phone, Connect IQ app, Hybrid Race Tracker, Settings. Read the UID in "Watch UID (needed to buy a code)", buy the code, then type it into "Unlock code from dialforge.dev". The trial-ended screen on the watch shows the UID too.
  • After the free trial without a code: a trial-ended screen with the UID replaces the app. Enter the code, then open it again. New watch? Write to us and the code moves for free.

Privacy and permissions

Permissions:

  • Activity recording: saves the session to Garmin Connect.
  • Extra FIT fields: adds the app's values to the saved activity.
  • Sensors: heart rate shown during the race.
  • Positioning: only for run pace when Run pace (GPS) is On.

No internet use. Data stays on the watch and in the activities you save.

Troubleshooting

The code does not work. Check that the UID you bought for matches "Watch UID (needed to buy a code)" and type all 8 characters (case is ignored, no 0, O, 1 or I). A code for another app does not fit. Sync, then reopen.

What is on the race screen? Total time, segment name and target, segment clock, next segment, heart rate, and a plus or minus against your best split once one is saved.

Does it use GPS? Only if you switch on Run pace (GPS), and only for run pace. Transitions are always your button, so indoor races work.

Where is my race afterwards? Choose Save and finish: one Garmin Connect activity, a lap per segment. After an undo the file keeps one extra short lap; app times stay right.

Contact

kontakt@dialforge.dev or dialforge.dev. Please write before leaving a low rating.

Permissions and privacy

This product asks the watch for the permissions below. Connect IQ shows them when you install it.

  • Activity recording: Saves your workout in Garmin Connect (the activity from this app). The data stays in your Garmin account.
  • Own data fields in the activity: Adds this app's own numbers (for example points or sets) to the saved activity.
  • Heart rate and sensors: Reads heart rate and other sensors of the watch while the app runs.
  • Location (GPS): Uses the watch location for distance, speed or sun and moon times. The location is not sent anywhere.
  • Your profile: Reads your Garmin profile on the watch (for example age, weight, heart rate zones) to calculate values for you.

This product does not use the internet and sends no data to our servers.

Compatible watches

51mm, Adventurer, Captain, Carbon Edition, Commander - Carbon Edition, D2 Air X15, D2 Mach 1 Pro, Enduro 2, Enduro 3, epix (Gen 2), epix Pro (Gen 2) 42mm, epix Pro (Gen 2) 47mm, epix Pro (Gen 2) 51mm, Forerunner 165, Forerunner 165 Music, Forerunner 245, Forerunner 245 Music, Forerunner 255, Forerunner 255 Music, Forerunner 255s, Forerunner 255s Music, Forerunner 265, Forerunner 265s, Forerunner 55, Forerunner 570 42mm, Forerunner 570 47mm, Forerunner 965, Forerunner 970, fēnix 7, fēnix 7 Pro, fēnix 7 Pro - Solar Edition (no Wi-Fi), fēnix 7S, fēnix 7S Pro, fēnix 7X, fēnix 7X Pro, fēnix 7X Pro - Solar Edition (no Wi-Fi), fēnix 8 43mm, fēnix 8 47mm, fēnix 8 Pro 47mm, fēnix 8 Solar 47mm, fēnix 8 Solar 51mm, fēnix E, Golfer, Instinct 3 AMOLED 45mm, Instinct 3 AMOLED 50mm, Instinct Crossover AMOLED, MARQ (Gen 2) Athlete, MARQ (Gen 2) Aviator, MARQ Adventurer, MARQ Athlete, MARQ Aviator, MARQ Captain, MARQ Captain: American Magic Edition, MARQ Commander, MARQ Driver, MARQ Expedition, MARQ Golfer, MicroLED, quatix 7, quatix 7 Pro, quatix 7 Sapphire, quatix 7X Solar, quatix 8 47mm, quatix 8 Pro 47mm, tactix 7, tactix 7 – AMOLED Edition, tactix 8 47mm, tactix 8 Solar 51mm, Venu 2, Venu 2 Plus, Venu 2S, Venu 3, Venu 3S, Venu 4 41mm, Venu 4 45mm, Venu Sq 2, Venu Sq 2 Music, Venu X1, vívoactive 4, vívoactive 4S, vívoactive 5, vívoactive 6

Rate it

Screenshots

Video

FAQ

What happens after the 30-day free trial?

The app shows a screen asking for a one-time unlock code from dialforge.dev instead of opening normally. Buy the code once below, no subscription.

Does the app send my data to Dialforge?

No. The app works fully offline, and the unlock code is checked on the watch itself, without contacting any server.

The app does not work as described on my watch. What can I do?

Write through the feedback form below, or to the e-mail in the footer, and we will fix it.

Changing your watch?

Write to me and I will move your code for free.

Changelog

Unlock

€6.99

One-time payment. No subscription. The code works on the watch whose ID you enter.

  1. Install the app from the Connect IQ store. It works fully and for free for the first 30 days.
  2. Enter the watch ID and pay. The code appears here at once and in the e-mail you give when paying.

Tell us how to make it better

Sign in as a tester to leave feedback.

Sign in or download for free